Archive for November 2012

Split Line tool

Split Line tools to project entities such as sketches, solid, surface, face, plane, or surface spline to surfaces, or curved or planar. It divides the selected face into several separate face. we can divide the curve on some solid body with a single command. We can make a line following divisions: Projection. Projection sketch on the surface. We can divide the pattern line features created using projection curves. We can make use of text split line sketch. This is useful for making items such as decals. Silhouette. Make the split line on the cylinder. Intersection. Splits face with intersecting solid, surface, face, plane, or spline surface. When we make a line break with an open profile sketch, sketch must span at least tw o sides of the model




Creating Lines Split When we made the split lines, edges do not change that can be reused in the downstream and changed the update feature edges.  In this model we insert line splits at the front face as the last item in the FeatureManager design tree. If we change the order Line1 Split follow Extrude1 features, models defend downstream chamfer and fillet. 




















To create a projection split line:Click Split Line (Curves toolbar) or Insert, Curve, Split Line. In the PropertyManager, under Type Split, select Projection. Under Selection, click: A sketch for Sketch for the Project. We can choose some of the contours of the same sketches to share. face-face to project sketches for face to Split. One way to project the split line in only one direction.Click OK. To create a split line silhouette:Click Split Line (Curves toolbar) or Insert, Curve, Split Line. In the PropertyManager, under Type Split, click Silhouette. In Selection: Select the plane to the project through the silhouette of the model (the outside) for Direction of Pull. Select the face to face project for the plane to Split. face can not be planar. Set Angle to create a draft angle.Click OK. To create a line of cleavage junction:Click Split Line (Curves toolbar) or Insert, Curve, Split Line. In the PropertyManager, under Type Split, select Intersection. In Selection: Choose a splitting tool (solid cut, surface, face, plane, or surface splines) for Non Separates / face / Planes.Click on the face / body to Split, and select the target face or body that projected splitting tool.Click OK







Comments Off

Solidworks Boss-Extrude, circular pattern

Step 1. Create a circle with a diameter of 85 sketches, on the top plane


Step 2. Boss-Extrude1, to create a pedestal table.
Click Insert> Boss> Extrude
From the property manager, Direction 1
select offset, input the number 75
select the Blind, with a thickness of 5




















Step 3. Create a circle with a diameter of 15 sketches, the top plane.





















Step 4. Boss-Extrude2, to make the pole table.
Click Insert> Boss> Extrude
From the property manager, Direction 1
select the Up to Surface
select the face that will be made in reference

















Last step. circular pattern, to create a table leg.
Click Insert> patern / mirror> circular pattern










Comments Off

Autocad, Quick Properties

The latest from the Quick Properties is a tool that allows us to be able to see and change object properties in place,
without having to go to the Properties palette. we can also change the Quick Properties (QP) or off of the status bar.
After turning the feature on the position on, simply select an object and properties for editing.
You can control the display properties for each object in the CUI (for quick access select the Customize button QP).
The new Quick Properties tab in the Drafting Settings dialog box provides additional control.










Comments Off

Unigraphics, Part Navigator

Sketches can be created by selecting a Section Sketch icon in the creation of certain features such as Extrude and Revolve dialog, select the Sketch icon directly on Form Feature toolbar, or by selecting Insert> Sketch.
If we make a sketch of the feature creation dialog, section sketches remain internal to the feature. It does not display in the graphics window or in the Part Navigator. we can edit the sketch to access related features. If the sketch is needed to make additional
feature, you can select Make External Sketch of MB3 popup menu in the Navigator section and will appear in the graphics window.

If the sketch is not created from the feature creation dialog, it will appear as a separate feature in the Navigator section.

Comments Off

Making the Cut Extrude use offset

Set the initial conditions to extrude cut feature with offset
As we embark on the plane cut extrude the sketch plane offset from there.
We have to adjust the offset distance and enter into the Offset Value property manager ..
If necessary, click Reverse Direction to extend the features in the opposite direction from that shown in the preview.
Apply one or more features for multibody parts by selecting the Geometry pattern selection, and use the Scope feature to choose the body.
We have to create a model that we want to add a feature to multibody parts before adding the feature.
If we add a new body with a model that intersect with features, body-new body also regenerated to include the feature.
If we add a new body with a model that intersects the features, we need to use the edit feature to edit repel feature, choose a body-body, and add them to the list of the selected body. If we do not add a body to the list of the selected body, they remain intact.
When we first create models with multibody parts, automatic features intersecting process all the relevant sections. Auto-select is faster than all the body because the body only at the beginning of the list and does not regenerate the entire model. If we click on the body and clear Selected Auto-select, we must choose the bodies in the area of ​​graphics that we want to include.














































Comments Off

Autocad, Creates mirror an object.

This Menu mirror is very useful to create symmetrical objects because we can quickly draw half the object and then reflects the image the whole objects. we flip the object on the axis, called the mirror line to create a mirror image. To determine the line of the mirror while, we enter two points. we can choose whether to remove or retain the original objects.
Mirroring work in parallel to the plane XY of the current UCS.





To make a mirror object:
1. From the Modify menu, select Mirror.
2. Select the object to the mirror.
3. Specify the first point of mirror line.
4. Specify the second point.
5. Press ENTER to retain the original object, or enter y to delete the object in a mirror.

































































Comments Off

Solidworks, surface knit.

In the Solidworks facility helps us create a 3D solid, namely surface knit.
Knit Surface tool is used to combine two or more faces or surfaces into one.
Below the surface edge must be adjacent and non-overlapping (overlapping).
The position of the surface does not need to be in the same plane.
Try to choose an adjacent surface.
Click knit solid when the solid surface or solid form.
Select Merge to merge the entities face the same basic geometry.
Choose Gap Control to view or modify the tolerance gap knitting.












To make the surface follow langkah2 knit follows:
Click on the toolbar Surface Surface Knit, or click Insert, Surface, Knit.
In the PropertyManager,
Select the surfaces of adjacent surfaces, non-intersecting
Select faces or surfaces to be in Knit.
Select Try to form solid to create a solid model of a closed surface.
Select Merge to merge the entities face the same basic geometry.
Select the face to knit
Select Control Gap to see some edge gaps as possible, and to view or edit the tolerance limits or gaps.
See Knitting tolerance, make modifications if necessary.
Click OK.








































Comments Off
Powered by Blogger.