Solid Object Modeling with the Revolve method

Solid Object Modeling with the Revolve method Problem: Make solid cylinders with R = 50mm and length of 200mm. Target, Make a new part, Get to know the Revolve method, Get to know the Revolve dialog box 1. Click the New icon and part icon to create a new part 2. Click the icon, and the 2D sketch icon so we can sketch tools activate. 3. Click the centerline icon and then from the origin create the centerline line horizontally to the right 200mm. 4. Then click the full line icon and then from the origin make the line vertical upwards of 50 mm then horizontal to 200 mm and vertical down 50 mm so we get a picture like the following: 5. Click the Revolve icon, or on the menu line click insert, base, revolve, so the revolve dialog box will appear as follows. 6. From the revolve dialog box above, in the Revolve section we select the parameter One-Direction and type 360 ​​deg. 7. After the above process is complete, click the checklist so that we will

Powered by Blogger.