Sketching without a plane
Each feature is a collection of sketches of two-dimensional curves and points in the plane that we specify.
Features sketches are reusable objects that we can use to create new features from the other modeling features.
Use Line to make a feature associative curve. Type of line we get depends on the type we combine,
we can create different types of channels by combining different types of constraints.
we also can make non-associative line with this option,
aid plane used to define the line.
we can let the plane or we can determine its own plane.
we can use the boundaries to determine the long lines
To create a sketch, we have to do is:
1.Determine the distance value 2.Stop the line at the site constraints (such as the point of tangency) 3.Stop line on a selected object 4.we can use the features of associative lines for the project or intersecting geometry of the support plane. 5.associative curve is best used for small amounts associated with the geometry of curves and one another in 3D space. 6.If all the curves we are in the 2D plane may be easier to use sketches.
To create a sketch, we have to do is:
1.Determine the distance value 2.Stop the line at the site constraints (such as the point of tangency) 3.Stop line on a selected object 4.we can use the features of associative lines for the project or intersecting geometry of the support plane. 5.associative curve is best used for small amounts associated with the geometry of curves and one another in 3D space. 6.If all the curves we are in the 2D plane may be easier to use sketches.
Comments Off
Make line AutoCAD
In a 2D drawing after we determine the size of the paper / work area / layout is to make the line suitable form we want. There are many ways that can be done in drawing the line, this line can also the change of color, line type-stirp would strip, or strip-strip-dots or other reply. Every single line segment can be edited separately from other line segments in the series.
We can close the sequence of line segments so that the first and last segments are joined.
We can set the line properties including color, linetype, and lineweight.
For more information about properties, see Control Properties of Objects.
The steps commonly performed in a standard which makes the line is:
-Click the line on the toolbar or select menu draw draw - line.
- Click the starting point for making the line / start point
-Determine the length of the line at the command line with the figures
-Press enter to terminate a command image
Comments Off
Simple to learn 3d solidwork
Now we move on again about an easy way to learn 3d for solidwork.
We will create a rectangle boss who refers to the previous discussion.
The first step to open the file before, then
Create a sketch for rec boss.
Click Extruded Boss / Base on the Features toolbar.
Select the top face on the object.
Top Click on the Standard Views toolbar.
Click Rectangle on the Sketch toolbar.
Move the pointer over the layout.
Begin drawing a rectangle
Click to place the end of the rectangle.
Move the pointer to create a rectangle.
Remove the pointer and click on PropertyManager to complete the rectangle.
Click Smart Dimension on the toolbar / Relations toolbar.
Select the rectangle.
Move the pointer on the rectangle and click to place the dimension.
Modification of the contents of the box and then click the desired dimension in the graphics area.
Now we make a sketch has been completed, Extrude the sketch to make the boss rec.
Click on the toolbar Sketch Sketch.
Click Trimetric on the Standard Views toolbar for a better view.
In PropertyManager, under Direction 1, set Depth to 15.
Click OK
Comments Off
Powered by Blogger.